 Established 1999 Radio GearFor Sale in the USAFor UK and Australia Sales click below. |
RCScrapyard ►FREE RC Classifieds: Buy and Sell Radio Control gear◄ Cheap, low priced bargains on new, used, second hand, Radio Controlled (RC) model cars, boats, ships, airplanes (planes), helicopters, tanks, hovercraft, parts, equipment and spares.
| |||||
|
Established 1999 Radio GearFor Sale in the USAFor UK and Australia Sales click below. |
|
|
|
Just check the section marked "Ships To:" |
|
|
|
Radio Gear How to avoid Interference. 1/ The first consideration when installing your Receiver into your Electrically Powered Model is to make sure it is well away from the Negative Battery terminal, and the Motor. The Magnetic field can cause stuttering type interference at times of high current draw (i.e., Fast Acceleration) 2/ Make sure the Ariel tube is long enough for the Ariel wire. The tip of this wire is highly sensitive and should be as high, and as far away from the Motor as possible (yup, its that magnetic field prob again) 3/ If all else fails, a simple tip that often works for all RC Model enthusiasts is to wrap the receiver in Aluminium Foil, to shield against any magnetic and external radio interference. 4/ As a last resort, to protect against servo twitch, try ferrite beads. (available at Radio Shack or Maplins) These are threaded over the red, white (or yellow) and black wires of each servo. |
|
|
|
|
|
|
|
|
|
|
 |
Every effort is made to ensure that information contained within the RCScrapyard site is correct and fair. However, no responsibility can be taken for errors, omissions or inaccuracies. Any complaints will be dealt with as soon as possible. © RCScrapyard |